Print

Resin Bracelets: Art That Gleams in Your Hands

Print Recipe

5 Stars 4 Stars 3 Stars 2 Stars 1 Star

No reviews

Create beautiful and shiny resin bracelets using simple materials and clear steps in under an hour.

Ingredients

  • Epoxy resin and hardener (follow product ratio)
  • Silicone bracelet mold
  • Disposable mixing cups
  • Stirring sticks
  • Nitrile gloves
  • Protective mask or respirator
  • Pigment powders or resin dye (optional)
  • Fine glitter, tiny beads, or pressed flowers (optional)
  • Rubbing alcohol and paper towels
  • Heat gun or small butane torch
  • Sandpaper (220 to 600 grit)
  • Plastic drop cloth or tray

Instructions

  1. Read the resin label and set a clean, ventilated workspace. Put on gloves and a mask before you touch the resin.
  2. Measure the resin and hardener in the exact ratio required.
  3. Pour the hardener into the resin cup and stir slowly.
  4. Add pigments, glitter, or tiny decorations to the mixed resin.
  5. Pour a thin base layer into the silicone mold.
  6. Let the base layer sit for a few minutes and pop any bubbles.
  7. Pour the rest of the resin into the mold until the desired thickness is reached.
  8. Use a heat source to remove bubbles after the final pour.
  9. Cover the mold loosely and place it in a level, dust-free area.
  10. Wait for the recommended curing time before touching the resin.
  11. Demold gently by flexing the silicone.
  12. Sand rough edges and finish with a polishing cloth.

Notes

Keep a clean workspace and act quickly to clean up spills. Adult supervision is recommended for safety while mixing resin.

Nutrition

Find it online: https://www.diymadeeasy.com/resin-bracelets-art-that-gleams-in-your-hands/